Main description:

This volume contains selected and peer-viewed papers presented at the 21st Chinese Materials Conference 2020(CMC2020) held online in Beijing, China, Nov. 17-22. 2020. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and is held each year since the early 1990s. Chinese Materials Conference 2020 had 42 Symposia covering four fields of energy and environmental materials, advanced functional materials, high-performance structural materials, and design, preparation, and characterization of materials. This book will be useful and interesting for many engineers and researchers engaged in materials areas.

Contents:

Main Alloying Influence on Second Phase Dissolution during Solution Treatment of Al-Zn-Mg-Cu Alloys
Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy Deformed by Multi-Directional Forging with Decreasing Temperature
Improved Recrystallization Resistance and Welding Properties of Cold-Rolled Al-Mg Alloy Sheets by Microalloying with Sc and Zr
Effect of Pulse Current on Mechanical Behavior of High Temperature Titanium Alloy Ti55
Thermal Deformation Behavior of a New Metastable Beta Titanium Alloy
Penetration Damaging Behavior of ATI425 Titanium Alloy
Dendritic Growth of Rapid-Solidified Eutectic High-Entropy Alloy
Microstructure and Properties of Laser-Selected Melt-Formed AlSi10Mg Alloy
Experimental Study on Welding Process of TC4 Titanium Alloy with Different Welding Wires
Microstructure and Texture Evolution of Repetitive Upsetting-Extruded (RUEed) Mg-Gd-Y-Zn-Zr Alloy after Hot Compression
Morphology of Dispersoids in an Annealed Al-Mg Alloys
Effect of Boronizing Treatment on the Conductivity of a High-Conductivity and Heat-Resisting Al-Zr Alloy Conductor Material
Influences of Solution Temperatures on Microstructure and Mechanical Properties of near Titanium Alloy
Isothermal Oxidation Behavior of FGH720Li Superalloy at Service Temperatures
Effect of In Situ TiB2 Particles on the Grain Size and Mechanical Properties of 7075 Aluminum Alloy
Microstructure Evolution and Meta-Dynamic Recrystallization Behavior of Ti-45Al-8.5Nb-0.2W-0.2B-0.3Y Alloy during Inter-Pass Annealing after Deformation
Effect of Coarse-Grained Ring on Mechanical Properties and Cutting Performance of 2011 Aluminum Alloy Extruded Bar
Effect of Zr on the Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy with High Zn/Mg Ratio
Flow Cessation Mechanism of -Phase Solidification of High-Nb Tial Alloy
Microstructure and Tensile Properties Anisotropy of 7xxx Ultra-Thick Plate
Effect of Particle Size and Shape on Flowability of FGH96 Superalloy Powder
Research on Ultimate Thinning Rate of Superalloy Spinning
Effect of Erbium on Microstructure, Hardness and Electrochemical Properties of Al-5Zn-0.03In Alloy
Effect of Precursor Design on Preparing Open-Cell Aluminum Foam Fabricated by Space-Holder Method
Effect of Cryogenic Treatment on the Microstructure and Mechanical Properties of Extruded Mg-3.5Zn-0.6Gd Alloy
Effect of Strain Amounts on Cold Compression Deformation Mechanism of Ti-55531 Alloy with Bimodal Microstructure
Hot Compression Deformation Behavior of Spray-Formed AlSn20Cu Alloy
Forming Process of Wire and Arc Additive Manufacture
Helmholtz Free Energy and the Activation Volume of Steady-State Creep in FGH96 Superalloy
Second Phase Particles and Mechanical Properties of 2618 Aluminum Alloy Ring
Preparation of Sub-Micron Bi Alloy Powers with the Ultrasonic Mixed Crushing
Effect of Internal Electromagnetic Stirrings DC Casting on Grain Refinement and Segregation of Large-Sized Billet of 2219 Alloy
Interface Reaction between Directional Solidified Superalloy DZ40M and Ceramic Mould
Microstructure of Additive Manufactured Ti6Al4V by Electron Beam Melting
Microstructure Evolution of Al-Zn-Mg-Cu Alloy with Erbium during Homogenization
Effect of Temperature on the Cyclic Stress Amplitude of ENiCrFe-1 Ni-Based Alloy Electrode and its Mechanism
Microstructure Evolution and Mechanical Properties of Mg-10.37Gd-3.66Y-2.27Zn-0.52Zr Alloy during Reciprocating Upsetting-Extrusion
Effect of Jet Grading Technology on the Properties and Structural Characteristics of Tungsten Products
Microstructure Evolution and Mechanical Properties of Mg-Gd-Y-Zn-Zr Alloy during Compression
Microstructures and Mechanical Properties of MIG Welded Al-Mg-Si-xCu Alloys
Low Cycle Fatigue Properties of FGH720Li Superalloy
Interface Reaction between DD6 Single Crystal Superalloy and Ceramic Core
Microstructure Evolution of near Titanium Alloy during Multi-Step Thermomechanical Deformation Process
Effect of Heat Treatment on Microstructure and Mechanical Properties of AlSi10Mg Alloy Fabricated by Selective Laser Melting
Interface between FGH96 Superalloy and Refractory Slurry with Different Soaking Time
Characterization of Hot Deformation Behavior of Ti-Al-Nb-Zr-Mo-Cr Alloy
Microstructures and Mechanical Properties of Annealed Fe-8Mn-6Al-0.4C Duplex Low-Density Steels
Effect of Heat Treatment Process on Mechanical Properties and Microstructure of S280
Effect of the Service Temperature on the Strength Plasticity and Fracture Mechanism of Cr-Mo Casing Steel
Surface Performance of Chrome-Free Anti-Fingerprint Zinc and Zn-Al-Mg Coated Steel
Hot Deformation Behavior of 980MPa -TRIP Steel
Microstructure and Mechanical Properties of ER70-Ti Steel for Gas Shielded Welding Wire
Phase Transformation of ER70-Ti for Gas Shielded Wire
Phase Transformation Law of Nb Microalloyed Steel at Different Cooling Rates
Microstructure Evolution and Mechanical Properties of 67GPa*% Grade Medium Manganese Steel
Spinning Process of D406A Ultra-High Strength Steel
Microstructure and Properties of Q690D High Strength Low Alloy Steel
Microstructure and Mechanical Properties of High Strength Low Alloy Steel Q550D
Thread Galling Damage Mechanism and Prevention of a Low Alloy Steel Tubing Connection
Failure Analysis of Tee in Shale Gas Transportation Platform
Integrity Analysis of Casing Premium Connection under High Compression Load
Experimental Study of Steel Reinforcement Repair Sleeve on X80 Pipe with Interlayer Defect
Fracture Failure Analysis of the Blowout Preventer Ram in an Oilfield
Mechanical Properties and Microstructure Comparative Analysis of 500MPa Hot Rolled H-Section Different Positions for Ultra-Deep well Platform
Burst Failure Analysis of a HFW Pipe for Nature Gas Pipeline
Failure Analysis for Girth Weld of Gathering Pipelines
Hydrogen Sulfide Stress Cracking in a Q345R Welded Joint
Influence of Banded Structure on the Properties of Petroleum Pipe Steel and its Rating Analysis Method
Effect of RE Elements Addition on Corrosion Behavior of Mg-Zn-Ca Amorphous Alloys for Biomedical Applications
Effect of Spray Distance on the Microstructure and High Temperature Oxidation Resistance of Plasma Spray-Physical Vapor Deposition 7YSZ Thermal Barrier Coating
Progress of Laser Cladding Wear Resistant Coating on Titanium Alloy Surface: A Review
Research Progress on Corrosion Resistance of Titanium Alloy Oil Well Tubing
Corrosion Behavior and Mechanism of Oil Casing Steel in CO2 Salt Solution
Oxidation Behavior of LPPS MCrAlY Coatings at High Temperature: Part I TGO Growth and Phase Depletion
Abrasion Resistance and Corrosion Resistance of Chromium-Free Fingerprint-Resistant Zn and Zn-Al-Mg Coating Cold-Rolled Steel Sheets
Comparison of Corrosion Behavior of an Epoxy Coating and a RGO Modified Epoxy Coating on N80 Tubing Steel in 10.0 wt% NaCl Solution at Different Temperatures
Surface Effect in a Metastable Ti-Nb-Sn Alloy
Effect of Heat Treatment on the Microstructure and Mechanical Properties of a Co-Based Superalloy Strip
Reasons Analysis on Corrosion Perforation of L245 Pipeline from Interior Wall
Study on the Oxidation Behavior of LPPS MCrAlY Coatings at High Temperature: Part II Coating Microstructure Development
Dynamic Hardness of MCrAlY Abradable Seal Coating
Analysis of Laser Surface Hardening of GM246 Cast Iron
Comparative Study of Surface Contaminated Layer on Titanium Aluminum Alloy and Titanium Alloy Investment Castings
Effect of Graphene Content on the Micromorphology, Microhardness and Micro Frictional Resistance of Co-Ni-Graphene Composite Coating
Anticorrosion Property of TC27 Titanium Alloys and Application Evaluation in Tubing
Preparation and Performance Evaluation of a Novel Bactericide for Sulfate Reducing Bacteria
Effect of Ti and Sb Elements Addition on the Microstructure and Corrosion Resistance of Hot-Dip Galvanized Zn-11Al-3Mg Alloy
Failure Analysis of Cracked and Corroded Tubings in Sudong Block of Changqing Oilfield
Transdisciplinary Application of Functional Materials in Petroleum Engineering
Experimental Investigation on the Heat Dissipation Performance of Bismuth-Based Alloy Thermal Conductive Sheet
Fabrication of Y2Ti2O7 Transparent Ceramic by Spark Plasma Sintering
Process Parameters Study on Structure and Properties of Zr-Based Bulk Metallic Glasses
Preparation and Properties of Calcium Doped Carbon Nanofibers Photothermal Reagent
Effect of Reaction Time on the Coercivity of Barium Ferrite Synthesized by Hydrothermal Process
Diffusion Bonding Performance of Copper Target for 300mm Integrated Circuit
Impact of the Co Doping on the Structure, Magnetic Properties, and Phase Transition in Ni50-xCoxMn38Sn12 Ribbons
Progress of Microstructure and Texture of High Purity Tantalum Sputtering Target
Phase Field Simulation on the Surface Morphology of Cu/Ti Nano Thin Film
Design of Transmission Polarization Metasurface Converter
Research on Vortex Electromagnetic Wave Based on Coding Metasurface
Effect of the Binder on Properties of Molten Core and Co-Debinding Behavior in Silica-Based Ceramics
Weld Joint of Tantalum Sheet by Tungsten Inert Gas Welding
Molten Salt Synthesis of Multiple Manganese Oxides/Graphene Composites in Facile and Large Scale with Enhanced Supercapacitor Performance
Effect of Mo2C Addition on the Microstructure and Properties of TiC-High Manganese Steel-Bonded Carbide
Effect of Raw Material Purity on Structure and Properties of Metallic Glasses
High Pressure Sintering of Silicon Carbide with Mg-Cr3C2 Composite Additive
Effect of Annealing Temperature on the Soft Magnetic Properties of Fe70.43Nb10.77Si15.77Cu2.34B0.69 Amorphous Aanostrips at 20K, 300K
Research on Micro-Size Electrical Discharge Grinding Polycrystalline Cubic Boron Nitride Based on Single Pulse
FEM Simulation on Diffusion Bonding of High Purity Tungsten Target
A Mesoscopic Modelling Framework of Microstructure Evolution and its Application on Thermo-Mechanical Processes
Deformation Law of Cold Drawing Process of High Strength Bridge Cable Steel
Optimization of Magnesium Alloy Casting Process: An Integrated Computational Materials Engineering (ICME) Approach
Experiment and Simulation Analysis of the Pressure Carrying Capacity of X80 Pipe with Metal Loss Defect on the Girth Weld
Prediction of Grain Formation and Defects during Solidification in Single Crystal Superalloy Castings
Effect of Restored Energy Items in Recrystallization Simulation of AZ31 Magnesium Alloy
Simulation and Experimental Study of the Preheating Mould Temperature Distribution in Semi-Solid Diecasting
Microfluidic Fabrication of Helical Ca-Alginate Hydrogel Fibers
Gr/Cu Composites: Microstructure and Properties
Effects of Melt Ultrasonic Treatment and Forming Processes on Thermo- Physical Properties of SiCp/Mg and (SiCp+Mg2Si)/Mg Composites
Mechanical and Electrical Properties of Elastic-Porous Composite with Cu-Steel Bimetallic Wire Mesh
Long-Term Duration of Composite Repair Systems for Pipeline Defects
Quasi-State Compressive Properties of Functionally Graded Aluminum Matrix Syntactic Foams
Microstructure and Mechanical Properties of TiB2/Al-Si Composites Fabricated by Electron Beam Rapid Manufacture
Research on Microstructure and Properties of TiB2/Al-Si Multi-Element Piston Alloy Composite
Preparation and Thermal Properties of BN and LPSO Hybrid Reinforced Magnesium Matrix Composite
Research Progress on Preparation of SiC/Al for Electronic Packaging by Liquid Infiltration
Effect of Different Molecular Weight of PEG on the Crystallization Behaviors of Binary Polymer Blends PLA/TPS
Improvement of Mechanical Properties of Cu/Graphene Composite by In Site Reduction and Matrix Alloying with Titanium
Research Progress on Low-Carbon Technologies and Assessment Methods in Cement Industry
Effect of Non-Sulfur Stabilizer on Performance of SBS Modified Bitumen
Effect of Heat Aging on Properties and Structure of SBS Modified Bitumen Waterproof Membrane
Effect of Chemical Corrosion on Properties of SBS Modified Bitumen for Waterproofing Membranes
Preparation and Properties of Formic Acid Intercalated Mg-Al Layered Double Hydroxides Deicing Additive
Research Progress of Slag Structure and Hydration Activity
Environmental Analysis for Co-Processing of Municipal Solid Waste Incineration Fly Ash in Cement Kiln
Screening of Energy-Saving Technologies for Cement Production Based on Boston Consulting Group Matrix
Emission Characteristics of VOCs during Asphalt Pavement Construction
Energy Saving Preparation and Evaluation of a Novel Polycarboxylate Superplasticizer
0D Zn-ZIF/2D Co-ZIF Derived 0D ZnO/2D Co3O4 Heterostructures for ppb-Level Acetone Detection
Preparation of Magnetic Alginate-Based Biogel Composite Cross-Linked by Calcium Ions and its Super Efficient Adsorption for Direct Dyes
Water Footprint Evaluation of Steel Production in China
Kinetics of Copper Ion Leaching from Cement-Solidified Body of Blast Furnace Slag Adsorbing Copper Ion
Ag2O/ZnO Heterostructures with Enhanced Photocatalytic Activity
Life Cycle Assessment of the NdFeB Recycling Process Route for Oil Sludge Waste Treatment
Environmental Impact Analysis of Automobile Laminated Glass Production
Assessing Water Footprint of Copper Production by Pyrometallurgy
Preparation of Pd/PPy/Foam-Ni Electrode and its Electrocatalytic Hydrodechlorination of Dichlorophenols
Effect of Trivalent Metal Cations on the Properties of LDHs Supercapacitors Prepared from Electroplating Sludge
NO Reduction Using Coal and Active Carbon with and without Catalysts
Water Footprint Evaluation of the Production of Float Flat Glass